smccompany.com
Home - Register to Bid - Update Bidder Profile



SMC Auctions
Excess Equipment to Major Manufacturers - September 11, 2018 @ 9AM

Item Description
95.SALES TERMS
Due diligence to verify the condition and description
of an item is the sole responsibility of the Bidder prior
to placing any bid. Therefore, a Bidder shall examine or
inspect items prior to the day of the auction or assume
the risk. ALL ITEMS ARE SOLD AS IS, WHERE IS AND
WITH ALL FAULTS. SELLER, OWNER, AND
SMC AUCTIONS MAKES NO WARRANTY, EXPRESS
OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR
CONDITION OF ANY AUCTION ITEM. SMC AUCTIONS
OWNER, AND SELLER EXPRESSLY DISCLAIM ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. No allowance will be made
for errors in cataloging, genuineness, defects, or imperfections
regardless of whether they were previously disclosed.

96.MOVERS AND REMOVAL
Any Purchaser contractors, including riggers and machinery
movers, will not be allowed to work on the auction premises
until they have provided SMC Auctions proper insurance,
protecting SMC Auctions, the Seller, and the landlord from
all and any claims resulting from their actions. SMC Auctions
reserves the right to reject any proposed rigger or mover at
its sole discretion. All removal, including disconnecting of
utilities, will be at the sole expense, liability, and risk of the
Bidder: provided however, that if such costs are incurred by
SMC Auctions and notice is given, Bidder agrees to pay removal
costs incurred by SMC Auctions in addition to the amount bid
and accepted and other charges. Bidder is solely responsible
for determining the amount of such expenses prior to bidding.
UPS shipments are available for small items (ex: boxed lots)
for an additional handling charge. If you want your items
shipped via UPS please contact our office within 24 hours
of the end of the auction to make arrangements.
Call 866-961-3211 for questions. Thank you!

97.Precision Rigging out of Ames, IA
is an approved mover/rigger for this auction.

As a courtesy, they have provided their pricing
on a few of the bigger items. If you buy an item
that doesn't have a loading price listed please
call 515-231-6351for a price. Thank you!

98.15% BUYER'S PREMIUM
APPLIES TO THIS AUCTION

100.AC-HAND PALLET JACK
CAPACITY 5500 LBS
FORK LENGTH 48"
FORK WIDTH 27"
S/N 13061436-1/066

101.SIEMENS CONTACTOR RELAYS
SIEMENS SWITCHES, TERMINALS
AND OTHER ELECTRICAL SUPPLIES

102.BIOSYSTEMS INC TOXI ULTRA
SINGLE SENSOR GAS DETECTOR

103.ASCO RED-HAT II SOLENOID
AND PUMP REBUILD KIT

104.MARKING TOOLS

105.ADJUSTABLE REAMER
CAPACITY 1-13/16" TO 2-7/32"
(46MM - 56MM)

106.STUD EXTRACTION AND
THREAD REPAIR KIT

107.GRINDING AND CUT OFF WHEELS

108.NEW DBI SALA EXOFIT
FULL BODY HARNESS WITH
NEW REBEL PROTECTA 6
SELF-RETRACTING LIFELINE
AND (1) NEW YELLOW
ANCHORAGE CONNECTOR

109.PNEUMATIC GREASE GUN
WITH NEW 18" GREASE HOSE

110.TORIT DUST COLLECTOR
MODEL TD-486, S/N IG071652
700 - 1500 CFM, NUMBER OF FILTERS 9
DIMENSIONS 34" X 34" X 112" TALL
WEIGHT 500 LBS

PRECISION RIGGING LOADING PRICE $50

111.ADJUSTABLE REAMER
CAPACITY 2-3/4" TO 3-1/4" (70MM - 85MM)

112.POP BRAND BLIND RIVETS

113.NEW WESTWARD ALUMINUM OXIDE
BENCH GRINDING WHEEL
12" X 2" X 1-1/2"

114.SPEED FASTENER STUD DRIVER
MODEL 825

115.HAND BENDER
CAPACITY 1-1/2"

116.LOCK OUT TAG OUT SUPPLIES

117.GOODYEAR PURPLE FLEXWING
HOSE WITH VERSIGARD
MAX PSI 150, LENGTH 5'

118.A & A SHEET METAL PRODUCTS
SAFETY STORAGE CABINET
FOR FLAMMABLE LIQUIDS
CONTENTS INCLUDED
DIMENSIONS 17" X 17" X 22-1/2" TALL

119.AMROX 10 TON PORTA POWER
INCLUDES ATTACHMENTS

120.MECO DOUBLE SIDED CANTILEVER RACK
(3) UPRIGHTS, UPRIGHT DIMENSIONS
6" X 3" X 84" TALL, (18) ARMS
ANGLED ARM LENGTH 24"
CONTENTS INCLUDED
BLACK PIPE, STAINLESS STEEL PIPE
PVC PIPE

PRECISION RIGGING LOADING PRICE $350

121.INTERTECH LEAK DETECTOR
M1075 MISC. PARTS

122.ASSORTED RUBBER TUBING AND CORDS

123.ADJUSTABLE REAMER
CAPACITY 2-7/32" TO 2-3/4"

124.NEW DBI SALA EXOFIT
FULL BODY HARNESS WITH
NEW REBEL PROTECTA 6
SELF-RETRACTING LIFELINE
AND (2) NEW YELLOW
ANCHORAGE CONNECTORS

125.(1) PISTON RING EXPANDER
FOR RINGS 4-1/2" TO 7"
(1) PISTON RING EXPANDER NO. 202

126.NEW GEMINI ALUMINUM OXIDE
GRINDING WHEEL 8" X 1" X 1"
MILWAUKEE GRINDING WHEEL
8" X 1" X 1", SANDING STRIP
SANDING BITS

127.HOLE PUNCHES
1/4, 3/8, 1/2, 5/8
3/4, 7/8, 1, 2-1/4"

128.RETAINING RINGS AND CLAMPS

129.O-RING GAUGE
O-RING SPLICING KIT
WASHERS, BOLTS

131.THREADER

132.OMEGA INFRARED RECEIVER

133.INGERSOLL RAND PNEUMATIC DRILL
HOT GLUE GUN

134.DEEP WELL SOCKETS PARTIAL SET

135.IDEAL STEEL FISH TAPE
200' X 1/8"

136.MILBAR DEEP REACH
SAFETY WIRING KIT

137.KEYWAY SET

138.METRIC TAP AND DIE SET

139.WRIGHT TOOL ADJUSTABLE
TORQUE LIMITING WRENCH

140.TORIT DUST COLLECTOR

PRECISION RIGGING LOADING PRICE $100

141.(2) TRIPODS

142.ASSOCIATE BATTERY CHARGER
MODEL 6065, OUTPUT 12V, 30 AMPS
120V, 1PH

143.STEEL FISH TAPE
200' X 1/4"

144.EXTECH i5 INFRARED CAMERAMAN

145.MILWAUKEE 1-1/2" ROTARY HAMMER
120V, 1PH

146.LINSEIS FLATBED ELECTRONIC
RECORDER, MODEL L6512-II

147.ROTHENBERGER CRIMPING TOOL

148.DAYTON BATTERY LOAD TESTER
200 AMPS, 12V

149.NEW DBI SALA EXOFIT
FULL BODY HARNESS WITH
NEW REBEL PROTECTA 6
SELF-RETRACTING LIFELINE
AND (1) NEW YELLOW
ANCHORAGE CONNECTOR

150.OIL AIR HYDRAULICS 3,000 PSI GAUGE
WITH EATON 3/16", HOSE

151.GREENLEE SLUGBUSTER
KNOCKOUT PUNCH SET
1/2" THRU 2"

152.WIRE CUTTER AND STRIPPER SET

153.HANDY BENDER

154.NEW DBI SALA EXOFIT
FULL BODY HARNESS WITH
NEW REBEL PROTECTA 6
SELF-RETRACTING LIFELINE
AND (1) NEW YELLOW
ANCHORAGE CONNECTOR

155.MILFORD HOLE SAWS

156.ASSORTED TOOLS
PARTS AND TRAY

157.WEATHERHEAD HAND BENDER

158.CONCRETE BITS

159.GREASE GUN

160.(3) HAND BENDERS

161.DEWALT DRILL
MILWAUKEE 16gauge NIBBLER
CRAFTSMAN HAND HEAT STICK.

162.ASSORTMENT OF ELECTRICAL SUPPLIES
INCLUDES GENDER CHANGERS.

163.Ridgid 36540 Model 31-A NPT RH Alloy
Three-Way Pipe Threader. 1/2", 3/4", 1"

164.DRILL BIT

165.1- AMFLOW 845 LOCK ON HOSE
BARB ASSEMBLY TOOL
1-FLARING TOOL IMPERIAL
EASTMAN-CHICAGO NO.447F.

166.1-Uniphase 102-4 Helium-Neon Laser
w/ Power Supply MODEL 1201-1.

167.NEW ROLLS OF CAUTION TAPE

168.2- OPT ENG FULL SCALE
10sec AND 10,000 WATTS.

169.OK-312 TAP AND DIE SETS.

170.ASSORTMENT OF HAND TOOLS.

171.2- BOXES OF TYGON TUBING
ID 1/4in OD 3/16in. FORMULA R-3603.

172.2-EBM-PAPST R2D250-RA10-15
RADIAL FAN. NEW!

173.ASSORTMENT OF TAPE

174.6- STANLEY PADLOCKABLE
SPRING BOLT 6-1/2in SP1088.

175.1- NEW COPPER TUBING IN BAG
Model 820-1102-1.

176.PALLET OF MISC PARTS.

177.1- NEW TOLMATIC REPLACEMENT TUBE
MODEL RTBBC225 SK 40 STROKE 40in.

178.8' FORK EXTENSIONS, OPENING SIZE 2" X 4"

179.NEW STEEL HASP 1.5in
LOCKOUT BLACK FINISH RED
PVC COATED HANDLES. APPROX 25.

180.SCOTCHMAN DVORAK IRONWORKER
MODEL 424, CAPACITY 50 TONS
BAR SHEAR 24", 240/480V, 3PH
ANGLE SHEAR 4" X 4" X 3/8"
WEIGHT 2,800 LBS

PRECISION RIGGING LOADING PRICE $50

181.LUG RESISTORS AND
TRON RECTIFIER FUSES.

182.QUART BOTTLES AND FUNNELS.

183.HEAVY DUTY MILWAUKEE RIGHT
ANGLE DRIVE DRILL.

184.1- POWERMATE PAINT SPRAYER
1- BINKS MODEL 62 PAINT SPRAYER.

186.1- FLAT SQUARE BELT KIT
1- ROUND BELT KIT
1- LOCTITE RING SPLICING KIT

187.SOLAR 10AMP 6 and 12V
DEEP CYCLE BATTERY CHARGER

188.1- MILWAUKEE JIG SAW

189.ASSORTMENT OF RIDGID PIPE DIES
VARIOUS SIZES. SOME NEW!

190.(5) RING PLIERS

191.CRC INDUSTRIAL SILICONE

192.EMHART PNEUMATIC POP RIVET GUN
WITH RIVETS

193.(3) FLEX HONES

194.GREENLEE POWER FINDER CIRCUIT TRACER

195.DORMER 4100 TOOL KIT

196.RIDGID THREADER WITH
1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 2"

197.SPM INSTRUMENT LEAK DETECTOR
LDE-10, ULTRASONIC TRANSMITTER
MODEL LDF-13

198.DROP CORDS AND AIR HOSES

199.MILWAUKEE DRAIN CLEANER

200.WEBB INITIAL PINCH PLATE ROLL
MODEL 4048, LENGTH 48"
CAPACITY 12 GAUGE, ROLL DIAMETER 4"
ROLL ADJUSTMENT 9", 220/440V, 3PH
ROLL SPEED 16 FPM, WEIGHT 2,000 LBS
DIMENSIONS 82" X 30" X 48" TALL

PRECISION RIGGING LOADING PRICE $75


201.WEATHERHEAD 3/4" OD HAND BENDER

202.TAP AND DIE TOOLS

203.BLACK AND DECKER ROTARY HAMMER
115V, 1PH

204.GREENLEE 8842H HAND BENDER

205.LOUISVILLE 2' STEP LADDER

206.HAND BENDER, 1" WIDE

207.(2) CABINETS, 36" X 18" X 72"

208.BROOMS AND SHOVELS

209.4' STEP LADDER

210.BUSCH VACUUM PUMP
20 CFM, LIKE NEW

211.(3) CABINETS

212.GLOBAL INDUSTRIAL 18" FAN
MODEL FE2-45G3FO (5)-C, 120V, 1PH

213.EXTENSION CORD 125V, 15 AMP

214.(2) CABINETS 36" X 24" X 77" TALL
CONTENTS INCLUDED

215.KAESER OIL WATER SEPARATOR
MODEL KCF 50

216.(2) CABINETS, 36" X 24"

217.NEW DAYTON PRECHARGED VERTICAL
WATER TANK, MODEL 3GVT8
CAPACITY 44 GALLONS
NEVER BEEN USED

218.CUTTING DIE #R-405
DIMENSIONS 72" X 20-1/4" X 9" TALL

219.HYGRODYNAMICS DEWPOINT MONITOR
MODEL 8005

220.YAM ENGINE LATHE, MODEL YAM-1500G
S/N B87159, ACU-RITE DRO
4-JAW CHUCK, WORK LIGHT
SWING 17", BETWEEN CENTERS 59”
SWING OVER CROSS SLIDE 9"
THRU HOLE 2-1/4", 480V, 3PH
SPINDLE SPEEDS (12) 32-1800 RPM
DIMENSIONS 112" x 40" x 74" TALL
WEIGHT 5,500 LBS

PRECISION RIGGING LOADING PRICE $325


221.3- PUSH CARTS
APPROX SIZE 30in x 20in

222.1- 36in FAN

223.2- BRITE TRASH CANS

224.1- ROL-LIFT PALLET JACK
5000lbs CAPACITY

225.3- PUSH CARTS 20in x 30in.

226.2- PUSH CARTS 24in x 20in.

227.Steel Medical Cylinder Cart
Cylinder Capacity: 1, 500 lb
Load Capacity, 48"H x 19-1/2"W
Item # 4ZJ16

228.1- 2 WHEEL DOLLY CART

229.2- PUSH CARTS 20in x 24in.

230.STANLEY VIDMAR CABINET
11 DRAWERS
DIMENSIONS 30" X 28" 59" TALL

PRECISION RIGGING LOADING PRICE $35

231.CARDBOARD BOXES
36in H 48in x 48in. APPROX 12

232.2- PUSH CARTS
APPROX DIM 20in x 30in

233.WESCO Platform Lift, 1000 lb
Load Capacity Mfr. Model # ESPL-60-2424

PRECISION RIGGING LOADING PRICE $25

234.1- WESCO PALLET JACK 27in x 48inl

235.2- TRASH CANS

236.RELIANCE 5C COLLET STAND
AND COLLETS SET. 1/64-1-1/8

237.ASSORTMENT OF O-RINGS AND SUPPLIES.

238.1- NEW OMEGA PROCESS METER DP24-E.

239.5-COOPOWER VRLA BATTERIES
NONSPILLABLE BATTERY
RECHARGEABLE.

240.ASSORTMENT OF ELECTRICAL
SUPPLIES AND CLEANERS

241.NEW 2- LITHONIA LIGHTING ELB 0607
BATTERY 6volt. SEALED RECHARGEABLE.

242.1-WERNER 6ft LADDER MAX 375lbs.

243.1- STEP LADDER AND 1- CHAIR

244.1-HEAVY DUTY CABINET
WITH CASTERS
DIMENSIONS 24 x 27 x 48in H.

245.1-DOLLY CART

246.1- DAYTON BATTERY
CHARGER/TESTER 60/40/2 AMP
MODEL 3LE81

247.1- DAYTON WET/DRY VACUUM
MODEL 4YE74. INCLUDES ATTACHMENTS.

248.1- DAYTON PEDESTAL GRINDER
7in MODEL 4Z908B. 1/2HP.

249.DESK, 3 CLOCKS, 6FT TABLE.

250.1- DAYTON PEDESTAL GRINDER
8in 3/4HP.

251.LOCKOUT TAGOUT CABINET
AND CONTENTS

252.TRASH CANS

253.(3) WELDING CURTAINS

254.BROOMS

255.AIR HOSES AND EXTENSION CORDS

256.GLOBAL INDUSTRIAL 18"
WORK STATION FAN, 120V, 1PH

257.5,500 LBS PALLET JACK

258.SHOVELS

259.STRETCHER

260.DOALL VERTICAL BANDSAW
MODEL 2013-V, S/N 457-891093
CAPACITY 20" X 13", THROAT 20"
BLADE LENGTH 154", DAYLIGHT 13"
BLADE SPEEDS 55 - 5,200 RPM
TABLE SIZE 26" X 26", 480V, 3PH
DIMENSIONS 45" X 55" X 85" TALL

PRECISION RIGGING LOADING PRICE $75

261.DUST PANS

262.BROOMS, HAND SQUEEGEES

263.DUST PANS

264.DIE CART, PLATFORM 36" X 24"

265.NEW BALDOR MOTOR
1/2 HP, FRAME 56C
DUAL VOLTAGE

266.(4) CROWBARS

267.DANDY SOUTHWORTH DIE CART
PLATFORM 31-1/2" X 19-1/2"

268.PARTS FOR A M333 BTM MACHINE

269.PORTABLE WORK STATION
60" X 36" X 75" TALL

270.SPANCO 1 TON PORTABLE GANTRY CRANE
S/N 150146-001-A, BETWEEN UPRIGHTS 18'10"
CLEARANCE 10', BEAM HEIGHT 10"
OVERALL DIMENSIONS 20' X 6' X 10'10" TALL
WITH HARRINGTON 1 TON ELECTRIC
CHAIN HOIST, MODEL NER010L
S/N 00004922, 480V, 3PH

PRECISION RIGGING LOADING PRICE $150

271.STOOLS

272.CART

273.(4) STOCK STANDS

274.(2) GARBAGE CANS

275.DOLLY

276.ASSORTMENT OF BUSS FUSES
AND STORAGE RACK

277.5- BOXES OF SOCKET HEAD CAP VARIOUS SIZES

278.3- STORAGE DRAWERS VARIOUS FITTINGS

279.AIR CYLINDER PARTS

280.

281.ASSORTMENT OF SCREWS AND BOLTS

282.1-NEW GRACO GENUINE REPAIR KIT
223-320 1- ASSORTMENT OF SHIMS
VARIOUS SIZES AND THICKNESS.

283.ASSORTMENT OF DOWELS

284.ECLIPSE MAGNETIC LATHE CHUCK

285.DAYTON GEAR MOTOR
ZEM 6006-1 115volt. 6rpm.

286.1in STRIPPER BOLTS.

287.1- ROHITI CHUCK 3in.

288.STORAGE DRAWER CONTAINER
INCLUDES FITTINGS INSIDE.

289.3/4 STRIPPER BOLTS

290.CLARK ELECTRIC WAREHOUSE TRUCK
MODEL NPR20, S/N NPR345-0055-9508FB
CAPACITY 4,000 LBS, LIFT HEIGHT 210"
EXTENDED REACH 24", BATTERY 36V
FORK LENGTH 42", SIDE SHIFT
FORWARD/BACKWARD TILT, HOURS 1,626
TRUCK WEIGHT 7,890 LBS
BATTERY CHARGER

PRECISION RIGGING LOADING PRICE $325


291.HEAVY DUTY DROP CORDS
1-30amp 480 VOLTS.

292.1/2 STRIPPER BOLTS

293.ASSORTMENT OF DOWEL PINS

294.5/8 STRIPPER BOLTS

295.ASSORTMENT OF DOWEL PINS

296.3/4 STRIPPER BOLTS

297.FLUKE 97 50MHZ SCOPMETER.

298.ASSORTMENT OF GRINDING WHEELS

299.ASSORTMENT OF PLASTIC

300.WERNER FIBERGLASS STEP LADDER
SIZE 8', CAPACITY 300 LBS
HIGHEST STANDING LEVEL 5'9"

301.1/2 STRIPPER BOLTS.

302.ASSORTMENT OF GRINDING WHEELS

303.DIAMOND WHEELS FOR GRINDERS
VARIOUS SIZES!

304.3/8 x 3 HEX SOCKET HEAD SHOULDER
APPROX 12 BOXES 2- BOXES 6-32 x 3/8
BUTTON HEAD CAP SCREWS.

305.ASSORTMENT OF GRINDING WHEELS.

306.ASSORTMENT OF TURCK WIRE AND CABLES.

307.L & I REAMER SET .3730-.4995
IN WOODEN CASE

308.ELECTRICAL SUPPLIES

309.MAYHEW HOLLOW PUNCH SET

310.MILLER MIG WELDER
MODEL MILLERMATIC VINTAGE
S/N KH308062, 1 PHASE, 200 AMPS
60% DUTY CYCLE

311.(2) GRINDING WHEELS

312.PHASE II END MILL CUTTER SHARPENER

313.(3) HAND SCOOPS

314.LAVALLEE & IDE REAMER SET
ONE MISSING

315.PORTABLE LADDER
WEIGHT CAPACITY 300 LBS
TOP STEP HEIGHT 38"

316.LAVALLEE & IDE REAMER SET

317.1/2" STRIPPER BOLTS

318.TUBE SHEAR

319.MICROMETER

320.STANLEY VIDMAR CABINET
9 DRAWERS
DIMENSIONS 30" X 28" 59" TALL

PRECISION RIGGING LOADING PRICE $35

321.5C COLLETS

322.(2) PNEUMATIC SANDERS

323.(3) NEW RADIAC GRINDING WHEELS
4" X 1" X 1/2", MAX RPM 6210

324.MINUTE MAN METRIC BROACH SET

325.FLUKE AC CURRENT PROBE
FOR OSCILLOSCOPES

326.1/2" STRIPPER BOLTS

327.3/8" STRIPPER BOLTS
VARIOUS LENGTHS

328.(2) V-BLOCKS, 4" X 4" X 3-1/2" TALL
V-WIDTH 3-7/8"

329.ROLLER

330.DAKE H-FRAME PRESS
MODEL 75H, S/N 140759
HAND OPERATED, CAPACITY 75 TONS
BETWEEN HOUSING 44", RAM TRAVEL 4-1/2"
OVERALL DIMENSIONS 67" X 36" X 92" TALL
WEIGHT 1,250 LBS, SCREW TRAVEL 7"
ARBOR PRESS NOT INCLUDED

PRECISION RIGGING LOADING PRICE $75

331.DOWEL PINS

332.STARRETT SCREW PITCH GAUGE

333.HARIG 5C SPIN INDEXER
SER. No24-4327 WITH BALDOR MOTOR
1/15 HP. 115VOLTS.

334.ASSORTMENT OF GRINDING WHEELS.

335.ASSORTMENT OF BOLTS AND SCREWS.

336.ASSORTMENT OF GRINDING WHEELS.

337.2- 10in x 1in x 3in NEW GRINDING WHEELS

340.JENSEN DIRECT GAS FIRED OVEN AND COOLING TUNNEL
OPERATING TEMPERATURE 375 - 450F
OVEN TIME CYCLE 4-1/2 MINUTES PREJELL
OVEN TIME CYCLE 9 MINUTES FINAL CURE
PREJELL CONVEYOR 1" X 1" FLAT WIRE MESH - 24" WIDE
FINAL CURE CONVEYOR 1" X 1" FLAT WIRE MESH - 42" WIDE
CONVEYOR SPEED 2 FPM
EXPLOSION RELIEF AREA 32 SQ. FT.
NATURAL GAS, 480V, 3PH
OVEN DIMENSIONS 8'10" X 18'8" X 8'9" TALL
COOLING TUNNEL DIMENSIONS
4'10" X 10' X 8'3" TALL
COOLING TUNNEL CONVEYOR SIZE
1" X 1" FLAT WIRE MESH - 42" WIDE
MANUALS, DRAWINGS AND SCHEMATICS
341.HEX HEAD BOLTS

342.NEW BATTERY BACK UP

343.GARDEN HOSE

344.HEX HEAD BOLTS AND BOLTS

345.WIRE NUTS

346.1- SANDUSKY METAL CABINET
APPROX DIMENSIONS 18 x 36 x 42in H.

347.WORK STATION
DIMENSIONS 28" X 23" X 63" TALL

348.5,500 LBS PALLET JACK

350.SUNNEN PRECISION HONING MACHINE
MODEL MBB-1660, S/N 82372
SPINDLE SPEEDS 200 - 2500 RPM
MOTOR 1/2 HP, ELECTRICS 480V, 3PH
DIMENSIONS 32" X 42" X 64" TALL

PRECISION RIGGING LOADING PRICE $75


351.SIDE MILLING ATTACHMENT

352.TAILSTOCK

353.FLEXIBLOK PNEUMATIC FILTER SYSTEM

354.CLAMP SET

355.WENESCO PREMIUM MELTER MIXER
WITH TILT MECHANISM, MODEL MPU45H
MAX TEMPERATURE 550°F
INSIDE DIMENSIONS 24" X 26"
OUTSIDE DIMENSIONS 32" X 32" X 35" TALL
BASE SIZE 50" X 60", MOTOR 3HP
SPEED 30 RPM, 240V, 1PH

LOCATED IN AMES, IA
PLEASE CONTACT SMC AUCTIONS
FOR EXACT LOCATION

 

356.HERMAN SCHMIDT MAGNETIC
SQUARING BLOCK

357.PHASE II PIN GAUGES

358.KAR-RY PRECISION GRINDER

359.C-CLAMP, HACK SAW
CRESCENT WRENCH

360.SKYJACK SCISSOR LIFT
MODEL SJ-3220, S/N 600796
CAPACITY 800 LBS, DRIVE HEIGHT 20'
PLATFORM HEIGHT 20', BATTERY 24V
SYSTEM PRESSURE 2000 PSI
LIFT PRESSURE 1600 PSI
MACHINE WEIGHT 3,740 LBS

PRECISION RIGGING LOADING PRICE $50


361.1- U LINE DOLLY CART H-2055

362.PILOT DRILLS AND CUTTERS

363.SHIM PUNCHES

364.4-1/2 ANGLE GRINDER
LOOKS LIKE A RYOBI. IT DOES RUN

365.VAN KEUREN PUN GAGE SET

366.ASSORTMENT OF O- RINGS

367.1- BROWN AND SHARP GAUGE BLOCK SET.

368.HEAVY DUTY STEEL LETTERS
AND NUMBER STAMPS.

369.1- MITUTOYO GAUGE BLOCK SET

370.STANLEY VIDMAR CABINET
11 DRAWERS
DIMENSIONS 30" X 28" 59" TALL

PRECISION RIGGING LOADING PRICE $35

371.GLOBAL INDUSTRIAL 18"
WORK STATION FAN, 120V, 1PH

372.1- MITUTOYO GAUGE BLOCK SET

373.DIE CUSHIONS

374.ASSORTMENT OF TAPS.

375.RED AND GREEN DIE SPRINGS.

376.LARGE HEX SOCKET CAP SCREWS.

377.ASSORTMENT OF SIDE MILLING CUTTERS
VARIOUS SIZES.

378.BLUE DIE SPRINGS

379.ASSORTMENT OF DOWEL PINS

380.NEW GROVE GEAR WORM GEAR REDUCER

381.2- BOXES OF SPRINGS

382.1- RIDGE PIPE WRENCH 36in.

383.NORTON SUPERABRASIVE WHEEL
DRESSING MACHINE
MODEL 6597, GRINDING WHEELS

384.HEX HEAD BOLTS

385.GRINDING WHEELS

386.HERMAN SCHMIDT MAGNETIC
SQUARING BLOCK

387.RIDGID 48" PIPE WRENCH

388.GRINDING WHEELS

389.V-BLOCKS AND GAUGE BLOCKS

390.WILLIS SOLBERGA DRILL PRESS
MODEL SE2030, S/N 331022E
TABLE SIZE 16" X 13", THROAT 12"
SPINDLE SPEEDS (8) 90 - 3610 RPM
STROKE 6", ELECTRICS 480V, 3PH
DIMENSIONS 20" X 28" X 74" TALL

PRECISION RIGGING LOADING PRICE $35

391.KEYWAYS AND BROACHES

392.YELLOW DIE SPRINGS
WITH ASSORTED RED DIE SPRINGS

393.MINUTE MAN KEYWAY AND BROACH SET

394.WASHERS

395.ASSORTED TAPS

396.TAP AND DIES AND SCREW EXTRACTORS

397.TAP AND DIE SETS

398.5C COLLETS

399.BALL BEARING SLEEVES

400.

401.STOCK SPRINGS

402.NEW MARATHON MOTOR
3/4 HP, 230/460V, 3PH, FRAME 56C

403.REAMERS, TAPS, DRILLS

404.FEELER GAUGES

405.CLAMPS

406.BIMBA AIR CYLINDERS

407.NEW BALDOR INVERTER DRIVE MOTOR
1-1/2 HP, 230/460V, 3PH, FRAME 145TC

408.DRILL CHUCKS

409.ASSORTED DIE SPRINGS

410.BRIDGEPORT SERIES 1 MILL
X-AXIS POWER FEED, S/N 232570
ACU-RITE DRO, TABLE SIZE 9" X 48"
T-SLOTS 3 ON 2-1/2" CENTERS
X-TRAVEL 36", Y-TRAVEL 12"
KNEE TRAVEL 16", QUILL TRAVEL 5"
ELECTRICS 480V, 3PH, 2HP, R8 TAPER
DIMENSIONS 64" X 52" X 83" TALL
WEIGHT 2,200 LBS

PRECISION RIGGING LOADING PRICE $225


411.LEMPCO LARGE DOWEL PINS

412.GAS SPRINGS

413.PUNCHES AND PUNCH HOLDERS

414.NEW MARATHON MOTOR
3/4 HP, 230/460V, 3PH, FRAME 56C

415.STRAIGHT SHANK DRILL BITS

416.ALLEN WRENCHES

417.REAMERS AND DRILL BITS

418.ALLEN WRENCHES

419.PACIFIC SCIENTIFIC MOTOR
1 HP, 90V DC

420.HARIG HAND FEED SURFACE GRINDER
MODEL 612, S/N 20796
WALKER MAGNETIC CHUCK
CAPACITY 6" X 12", MOTOR 5HP
ELECTRICS 480V, 3PH
DIMENSIONS 36" X 40" X 82" TALL
WEIGHT 900 LBS

PRECISION RIGGING LOADING PRICE $125

421.COLLETS

422.PUNCHES AND PUNCH HOLDERS

423.REAMERS

424.PALLET JACK
CAPACITY 5,500 LBS

425.SNAP ON TORQUE WRENCH

426.PUNCH HOLDERS

427.UNCOILING MACHINE
CAPACITY 3,500 LBS, 115V, 1PH

PRECISION RIGGING LOADING PRICE $35

428.PUNCHES AND PUNCH HOLDERS

429.END MILL CUTTERS
VARIOUS SIZES 1/8-1/2in

430.HYDRAULIC PRESS
HPU HONDA ENGINE, CONTROL VALVE
25 GALLON HYDRAULIC TANK
BETWEEN HOUSING 44"
OPENING HEIGHT 80", HEIGHT 112"
CYLINDER DIAMETER 3"
CYLINDER LENGTH 60"
ROD DIAMETER 2-1/2"
ROLLER TABLE LENGTH 8'

LOCATED IN AMES, IA
PLEASE CONTACT SMC AUCTIONS
FOR EXACT LOCATION


431.ASSORTMENT OF PUNCHES AND DIES.

432.AIR DIE GRINDER WITH
ASSORTMENT OF ATTACHMENTS.

434.GREASE GUN

435.REAMERS

436.KALLER GAS SPRINGS

437.REAMERS

438.ASSORTMENT OF DRILL BITS

439.2- CASES OF DRILL
1- HUOT, 1- PRECISION

440.K.O. LEE TOOL AND CUTTER GRINDER
MODEL B2000, 230/460V, 3PH
T-SLOTTED TABLE SIZE 5-1/4" X 37"
X-AXIS TRAVEL 20", Y-AXIS TRAVEL 7"
COLUMN TRAVEL 7"
DIMENSIONS 60" X 36" X 55" TALL

PRECISION RIGGING LOADING PRICE $150

441.ASSORTMENT OF ENGRAVER BLANKS

442.CONTROL PANEL
SET UP TO CONTROL 3 ZONES
240V, 1PH, 60 AMPS

LOCATED IN AMES, IA
PLEASE CONTACT SMC AUCTIONS
FOR EXACT LOCATION


443.ASSORTMENT OF PUNCHES AND DIES.

444.ASSORTMENT OF BOLTS

445.ASSORTMENT OF STRIPPER BOLTS

446.ASSORTMENT OF SET SCREWS
AND DANLY SPRING CAGES.

447.CHAIR, STEP STOOL AND STEP LADDER

448.ASSORTMENT OF HAND TOOLS

449.1/4 STRIPPER BOLTS.

450.LYON PLATINUM MODULAR
DRAWER CABINET METAL
7 DRAWERS
DIMENSIONS 30" X 28" 59" TALL

PRECISION RIGGING LOADING PRICE $35

451.CUTTERS AND PORTER RETAINERS

452.2- NORTON DIAMOND WHEEL
6 x 1-1/4in ASD220

453.3- TAPS

454.3- DIAMOND WHEELS

455.BROOMS, DUST PANS AND PITCH FORK.

456.KURT VISE. ANGLOCK VISE
MODEL D688

457.ANGLE PLATE 8in x 10in x 12in.

458.WELDING POSITIONER
MODEL 100
CAPACITY 100lbs. RPM 0-9.

459.3- PUSH CARTS
CONTENTS ON CART NOT INCLUDED

460.

461.GREASE PUMP AND 3 BUCKETS
OF CHEVRON MULTIFAK
INDUSTRIAL GREASE.

462.2- DAREX BORAZON WHEEL
PART #2115
2- NORTON DIAMOND WHEEL ARMORED

463.3- CINICINNATI WHEELS 9A80-K6-VFM 6Y
3- NORTON 4/3 x 1-1/2 x 1-1/4 WHEELS.

464.6in AUTO WELLS VISE

465.DOWEL PINS

466.2- BOXES OF 5/16 AND 3/8 STRIPPER BOLTS

467.2- BOXES OF YELLOW AND RED SPRINGS

468.1- CLEARVIEW RADI-ANGLE
FORM WHEEL DRESSER
WITH WOODEN CASE

469.2- SPRINGS

470.ORION WRAPPING MACHINE
MODEL L66-9S, S/N 4094647
TURNTABLE DIAMETER 59"
TURNTABLE HEIGHT 11"
OVERALL DIMENSIONS
96" X 64" X 95" TALL, 120V, 1PH
WEIGHT 1700 LBS

PRECISION RIGGING LOADING PRICE $75

471.1- HEIGHT GAUGE.

472.SANDPIPER PUMP PB-1/4
MODEL TS3PP. INCLUDES GAUGE
AND FILTER.

473.1- PALGREM SWIVEL/TILT VISE 2-1/2in

474.ECONO ANGLE RADIUS DRESSER
CENTER LINE OF THIS TOOL 3.400

475.4- SETS OF STEEL STAMPS

476.1-ANGLE PLATE 12 x 8 x 8in
1- ANGLE PLATE 8 x 7.5 x 6.5in.

477.6in KURT TYPE VISE

478.Toledo Transducers AutoCell
Calibration Load Cell Model AC-250
CAPACITY 250 TONS

479.HARIG GRIND-ALL FIXTURE
NO. 1 UNI-DEX AND DUO-FORM.

480.METTLER TOLEDO SCALE
CAPACITY 5,000 LBS
PLATFORM SIZE 60" X 60"

PRECISION RIGGING LOADING PRICE $25

481.5C HORIZONTAL/VERTICAL COLLET
INDEX PHASE II STOCK 225-205

482.4- DIAMONDS WHEELS. (3 ARE NORTON)

483.SPIN INDEX

485.VULCAN U-PATTERN DROP FORGED
HOLD DOWN CLAMPS.

486.3- OIL CANS

487.S.P.I OFFICAL D.M.E. MOLD
FINISH COMPARISON KIT.

488.STEEL STAMPS

489.1- ERICK MIRACLE POINT
MODEL 900. MERCURY BALANCED.

490.CLARK FORKLIFT
CGC25, S/N C365L-0308-9402EB
CAPACITY 4,500 LBS
TRUCK WEIGHT 8,987 LBS
FORWARD/BACKWARD TILT
SIDE SHIFT, LP, HOURS 4,046

THIS ITEM CANNOT BE PICKED UP UNTIL
SEPTEMBER 21, 2018
SMC AUCTIONS AND PRECISION RIGGING
RESERVE THE RIGHT TO USE THIS FORKLIFT



491.2-REGULATORS
OXYGEN AND ACETYLENE
1- AIRCO WELDING TORCH STYLE 819-0800

492.3- STEEL STAMPS SETS. SOME MISSING

493.2- SUNNEN N37-J85 STONE SET 5K&5H
1- SUNNEN M27J45
1- SUNNEN STONE SET NY40-A45
1- SUNNEN STONE SET NY40-J87

494.3 END MILL HOLDERS
2- R8-EMH 3/4
1- R8-EMH 1in

495.2- WELDON TU-LIP COUNTERBORERS (ON SIZE)
1- WELDON TU-LIP COUNTERBORERS (OVERSIZE)

496.DRILL BITS APPROX 25

497.OUT BROAD SUPPORT WITH R8 ARBOR.

498.3- CHALLENGE ANGLE PLATES
8in x 10in x 5.5in

499.SHIMS

500.MITUTOYO PROFILE PROJECTOR
MODEL PH-3500, S/N 420239
SCREEN CENTER HEIGHT 36"
110V, 1PH, DIMENSIONS 20" X 45" X 46" TALL

PRECISION RIGGING LOADING PRICE $35

501.BARREL DOLLY

502.TORCH CART WITH TORCH HEAD
HOSES, REGULATORS AND STRIKERS

503.ARBOR PRESS, THROAT 6"

504.16" FACE PLATE

505.HEAVY DUTY STEEL CART
DIMENSIONS 48" X 28" X 35-1/2" TALL
CONTENTS NOT INCLUDED

506.BIG JOE LIFT CART
MODEL 14S57, S/N 78088
CAPACITY 1000 LBS
LOAD CENTER 15"
PLATFORM 20" X 25"
MAX LIFT HEIGHT 50"

PRECISION RIGGING LOADING PRICE $25

507.KURT 6" MACHINE VISE
MODEL D60, S/N 034961
WITH ROTARY BASE

508.BRIDGEPORT ANGLE FIXTURE
T-SLOTS 2 ON 4" CENTERS
PLATE DIMENSIONS 10" X 12" & 6" X 12"

509.HEAVY DUTY STEEL CART
DIMENSIONS 36" X 28" X 34" TALL
CONTENTS NOT INCLUDED

510.TROYKE 12" ROTARY TABLE
MODEL U-2, S/N 28739

511.HEAVY DUTY STEEL CART
DIMENSIONS 36" X 28" X 34" TALL

512.13 DRAWER PARTS BIN
DIMENSIONS 34" X 8" X 13" TALL
CONTENTS INCLUDED

513.HEAVY DUTY STEEL CART
DIMENSIONS 48" X 30" X 35" TALL
CONTENTS NOT INCLUDED

514.HIPPO HOPPER SELF DUMPING HOPPER
S/N 20559, MAX LOAD CAPACITY 3000 LBS
SCRAP INCLUDED

PRECISION RIGGING LOADING PRICE $35

515.TSI 8" SUPER SPACER
WITH FINE ADJUSTABLE CHUCK

516.HEAVY DUTY STEEL CART
DIMENSIONS 48" X 30" X 35" TALL
CONTENTS NOT INCLUDED

517.GRANITE SURFACE PLATE
GRADE B, INCLUDES STAND
DIMENSIONS 36" X 30" X 6" TALL

PRECISION RIGGING LOADING PRICE $25

518.PACK-MASTER PRESS
MADE OUT OF A HANDYMAN JACK
DIMENSIONS 48" X 28" X 92" TALL

519.HEAVY DUTY WELDING TABLE
72" X 36" X 33" TALL, 7/8" THICK STEEL TOP

PRECISION RIGGING LOADING PRICE $35

520.CRESS ELECTRIC HEAT TREAT FURNACE
DUAL CHAMBER, MODEL C122012DK, S/N 9102
CHAMBER SIZE 12" X 20" X 12" TALL
LOWER CHAMBER SIZE 12" X 17" X 12" TALL
OVERALL DIMENSIONS: 38" X 38" X 64" TALL
UPPER CHAMBER MAX TEMP 2,250°F
LOWER CHAMBER MAX TEMP 1,250°F
WEIGHT 950 LBS, COOLING TABLE

PRECISION RIGGING LOADING PRICE $75

521.WELDING ROD AND WIRE

522.ASSORTED BAR AND SQUARE STEEL
SOME ALUMINUM, SHELF
DIMENSIONS 49" X 25" X 72" TALL

WINNING BIDDER IS RESPONSIBLE
FOR LOADING


523.CABINET WITH LOCKOUT TAGOUT SUPPLIES

524.ASSORTED BAR AND SQUARE STEEL
SOME ALUMINUM, SHELF
DIMENSIONS 48" X 37" X 84" TALL
PALLET INCLUDED

WINNING BIDDER IS RESPONSIBLE
FOR LOADING


525.(2) CABINETS DIMENSIONS
48" X 24" X 78" TALL

526.PLASTIC TUBS
DIMENSIONS ARE 20x 23 x 13in Tall
APPROX 45 TUBS

527.28 BLUE PLASTIC TUBS
WITH LIDS DIMENSIONS 26 x 16 x 12inH.

528.APPROX 40 GREEN TUBS
APPROX DIMENSIONS 23 x 16 x 12in H.

529.APPROX 120 TUBS WITH LIDS
APPROX DIMENSIONS 20 x 12 x 7inH.

530.WELLSAW HORIZONTAL BANDSAW
MODEL 1016, S/N 3002
CAPACITY 10" X 16", MANUAL VISE
BLADE SIZE 1" X 0.035" X 138" LONG
115V, 1PH, WEIGHT 950 LBS
DIMENSIONS 84" X 30" X 40" TALL

PRECISION RIGGING LOADING PRICE $35


531.APPROX 50 TUBS SOME
WITH LIDS AND VARIOUS SIZES.

532.RELIANCE 5C COLLET STAND
AND COLLETS SET. 1/64-1-1/8.

533.SUNNEN HONE MANDREL SLEEVES
1-K16-A 2- K20-A 1- AK20-A

534.6- MAGNET SHIELDS

535.KDK TOOL POST HOLDER
WITH QUICK CHANGE TOOL HOLDERS

536.SAFETY CAN

537.SUNNEN PRECISION HOLE GAGE
MODEL PG-180-E RANGE .370 to .740 in.
RANGE .740 to 1.500 in.

538.1- LUMA EQUIPMENT TESTER
120volts. 50-60 HERTZ. AC ONLY.

539.SUNNEN HONE MANDREL SLEEVES
1-K16-A . 1-K20-A . 3-AK20-A.

540.YAM ENGINE LATHE, MODEL YAM-700
S/N A97645, ACU-RITE DRO
3-JAW CHUCK, WORK LIGHT
SWING 14", BETWEEN CENTERS 27"
SWING OVER CROSS SLIDE 8"
THRU HOLE 1-9/16", 480V, 3PH
SPINDLE SPEEDS (6) 83-1800 RPM
DIMENSIONS 70" x 30" x 45" TALL
WEIGHT 2,700 LBS

PRECISION RIGGING LOADING PRICE $225


541.STARRETT STRAIGHT EDGE
BEVELED 72 In IN WOODEN CASE
NO.385-72

542.RELIANCE 5C COLLET STAND
AND COLLETS SET. 1/64-1-1/8.
SOME MISSING

543.DAYTON 32" SHOP FAN
120V, 1PH

544.END MILLS AND REGROUND END MILLS

545.PLASTIC TOTES, APPROX 72

546.(2) 10" C-CLAMPS

547.GLOBAL INDUSTRIAL 18"
WORK STATION FAN, 120V, 1PH

548.UNCOILING MACHINE
CAPACITY 5,000 LBS, 115V, 1PH

PRECISION RIGGING LOADING PRICE $35

549.END MILLS

550.WERNER, FIBERGLASS STEP LADDER, CAPACITY 300 LBS, 8'

551.(2) 10" C-CLAMPS
(1) 8" C-CLAMP

552.DEAD CENTER AND V-BLOCK

553.NEW DRILL BITS

554.SAFETY AND HAZARD STICKERS

555.PLASTIC TOTES, APPROX 72

556.4-1/2", 5-1/2" & 6" C-CLAMPS

557.SAW BLADES

558.NEW DRILL BITS

559.ALUMINUM OXIDE AND
CLOVER COMPOUND

560.2002 CHEVROLET SILVERADO
MODEL K2500HD, EXTENDED CAB
VIN 1GCHK29U12E227184
GASOLINE, 8 CYLINDER
WEIGHT 5,700 LBS
GVWR 9,200 LBS
253,000 MILES
CURTIS SNO-PRO 3000 BLADE
BLADE LENGTH 84"

561.7" & 8" C-CLAMPS

562.AIR HOSES

563.END MILL CUTTERS

564.CARBIDE TIPPED BORING BARS

565.ROSE BUD WITH OTHER ATTACHMENTS

566.PLASTIC TOTES APPROX 68

567.CARBIDE CUTTERS

568.PILOT DRILLS

569.NEW DRILL BITS

570.STANLEY VIDMAR CABINET
11 DRAWERS
DIMENSIONS 30" X 28" 59" TALL
WITH SO MUCH CONTENTS

PRECISION RIGGING LOADING PRICE $35

571.(2) 9" C-CLAMPS

572.GRINDING WHEELS

573.(2) MOUNTING FIXTURES

574.CLAMP SET

575.PLASTIC TOTES, APPROX 60

576.CRITERION BORING HEAD
MODEL DBL-203
WITH STRAIGHT SHANK

577.ASSORTED END MILL CUTTERS
AND DRILL BITS

578.END MILL CORNER ROUNDING BITS

579.SUNNEN HONE WITH STONES

580.J.L. BECKER CONTINUOUS MESH BELT
BRAZING FURNACE WITH AMMONIA DISSOCIATOR
AND GAS DRYER
TEMPERATURE RANGE 300 - 2200F
LOAD CAPACITY 100 - 4000 LBS
CONVEYOR 1" X 1" FLAT WIRE MESH
CONVEYOR WIDTH 13", HEATING ELECTRIC
ELECTRICS 480V, 3PH
THERMAL DYNAMIX AMMONIA DISSOCIATOR
MODEL AD10EJ, S/N 15-018
CUBIC FEET PER HOUR (CFH) 1,000
ELECTRICS: 480V, 3PH, 60HZ
LECTRODRYER GAS DRYER
MODEL GAS-B-27, S/N 9403B8286
HEATER 1 KW, PURGE 1.1 SCFM
DIMENSIONS 50" X 18" X 67" TALL, WEIGHT 500 LBS
CONNECTION 3/4" OR 1", MAX PRESSURE 15 PSIG
ELECTRICS 110V, 1PH, 60HZ, 1.2KVA
581.COLD AIR SYSTEM, 15 SCFM, 150 PSIG

582.8" 3-JAW CHUCK
WITH ASSORTED CHUCK JAWS

583.CLAMP SET

584.FILES AND STONES

585.APPROX 60 TUBS

586.SQUARE D CONTROL PANEL
600V, 225 AMPS
CAT # HCN14522N

587.ASSORTMENT OF COUNTERSINKS BITS

588.ASSORTMENT OF BORING BAR CUTTERS

589.SMALL PRESS

590.HYSTER FORKLIFT, MODEL D120XL2S
S/N D004D09060X, CAPACITY 10,000 LBS
LIFT HEIGHT 208", BACK TILT, SIDE SHIFT
FORK POSITIONER, 4' FORKS
MAST, LP, TRUCK WEIGHT 20,000 LBS
SOLID TIRES, FRONT TIRE SIZE 22 X 12 X 16
REAR TIRE SIZE 18 X 8 X 12-1/8, HOURS 4,454

THIS ITEM CANNOT BE PICKED UP UNTIL
SEPTEMBER 21, 2018
SMC AUCTIONS AND PRECISION RIGGING
RESERVE THE RIGHT TO USE THIS FORKLIFT



591.JIFFY SUPER PROFILER JEPK-100

592.UNCOILING MACHINE
CAPACITY 5,000 LBS
115V, 1PH

PRECISION RIGGING LOADING PRICE $35

593.(5) HAND SCOOPS

594.ASSORTMENT OF TAPS

595.ASSORTMENT OF CUTTERS

596.REFRACTOMETER

597.EAGLEROCK SHANE RADIUS TOOL

598.1- JACOBS BALL BEARING
SUPER CHUCK 14N 3JT.

599.Assortment HSS Square
Tool Bit Lathe Fly Cutter Mill Blank

600.16 CELL OIL STORAGE UNIT
INCLUDES 15 BARRELS
DIMENSIONS 99" X 44" X 13' TALL
BARREL SIZE 22" X 22" X 36"
FAN NOT INCLUDED

CONTACT PRECISION RIGGING
FOR A LOADING QUOTE


601.R8 SHANK AND MILL ATTACHMENTS

602.10 PIECE KEO CUTTERS
KEY SEAT CUTTER SET.

603.TPI INDUSTRIAL FAN

604.1- WESCO TOOL MIST COOLANT GENERATOR.

605.ASSORTMENT OF SPACERS

606.1- LARGE KNURLING TOOL.2-1/8-4in

607.DAYTON FAN

608.TPI INDUSTRIAL FAN

609.MILL TOOLING ATTACHMENTS

610.TPI INDUSTRIAL FAN

611.SET UP BLOCKS

612.ASSORTMENT OF END MILL CUTTERS

613.2- END MILL GRINDING FIXTURES
1- MODEL A1-205 1- IWD-18670-H.

614.ASSORTMENT OF CUTTERS AND BITS

615.1- GAMET BORING HEAD

616.1- R8-EM HOLDER 1.0in.
1- R8-EM HOLDER 7/8in.
1- KENNAMETAL KENLOC II
INDEXABLE HEAD KL2IBR2CN4152- R8 COLLETS

617.STRAIGHT SHANK AND ATTACHMENTS.

618.BIRDGEPORT MACHINIST BORING HEAD No.2

619.END MILLS

620.TPI INDUSTRIAL FAN

621.END MILLS

622.ASSORTMENT OF CUTTERS

623.EXTENDED LINE UP TOOL

624.BISON LIVE CENTER
8811-4SP0LAND
TAPERED SHANK

625.CRITERION BORING HEAD
MODEL DBL-203, WITH R8 SHANK

626.ROLLING CABINET
DIMENSIONS 36" X 21" X 34" TALL
VISE NOT INCLUDED
CONTENTS INSIDE INCLUDED

627.SUNNEN HONE, MODEL SN

628.SUNNEN HONES AND STONES

629.STARRETT 3-1/2" BENCH VISE

630.INDUSTRIAL WASHER, 480V, 3PH
CONVEYOR 1" X 1" FLAT WIRE MESH
CONVEYOR WIDTH 14"
(3) NEW HEATING ELEMENTS
NYB BLOWER
ROSE DALEPARTS CLEANER

PRECISION RIGGING LOADING PRICE $225

631.(3) CABINETS
DIMENSIONS 36" X 18" X 78" TALL

632.(3) CABINETS
DIMENSIONS 36" X 24" X 72" TALL
36" X 24" X 78" TALL

633.DUMORE TOOL POST GRINDER
MODEL 8526, S/N 57-031, 120V, 1PH
CABINET WITH ACCESSORIES INCLUDED

634.UNCOILING MACHINE
CAPACITY 5,000 LBS
115V, 1PH

PRECISION RIGGING LOADING PRICE $35

635.PILOT DRILLS

636.ACCUPRO END MILL HOLDER
WITH R8 TAPER SHANK
CRITERION BORING HEAD
WITH STRAIGHT SHANK

637.PRESSURE PLUGS AND SET SCREWS

638.3- PUSH CARTS INCLUDES
TUB OF MISCELLANEOUS ITEMS.

639.GLOBAL INDUSTRIAL 18"
WORK STATION FAN

640.INGERSOLL RAND AOR DIAPHRAGM PUMP

641.DAYTON FAN

642.URETHANE FACED SLEDGE HAMMER
WITH EXTRA URETHANE FACE

643.1/2" TENSIONER AND
PLASTIC BANDING CUTTERS

644.JACOBS 1/2" DRILL CHUCK
WITH R8 TAPERED ARBOR

645.SUNNEN HONE MANDREL
CLAMPS, BELTS AND PARTS

646.GRINDING WHEELS
DIAMETER RANGE 3" - 12"

647.GRIPPLE LIFTING HOOK
MODEL MLD, S/N 051413-2
LENGTH 24", CAPACITY 300 LBS

648.HEAVY DUTY CART, DIMENSIONS 36" X 28" X 34" TALL, CONTENTS NOT INCLUDED

649.L-W DEMAGNETIZER
S/N B2392, 110V, 1PH

650.HYPERTHERM POWERMAX 800
PLASMA CUTTING SYSTEM
S/N 800-001021, 300V, 20-50 AMPS
480V, 3PH, WEIGHT 75 LBS
DIMENSIONS 23" X 15" X 24" TALL

651.GRIPPLE LIFTING HOOK
MODEL MLD, S/N 051413-1
LENGTH 36", CAPACITY 1000 LBS

652.MILL FIXTURE

653.STEEL SHIMS

654.28 DRAWER PARTS BIN
WITH SOME NEW TAPS

655.(2) SKU COME-A-LONGS
4,000 LBS CABLE PULLER
3/16" X 10' LONG CABLE

656.TOTE FILLED WITH PAINTS
LUBRICANTS AND CLEANERS

657.(6) SUNNEN HONE MANDRELS AND SLEEVES

658.MILL CUTTERS

659.EJECTOR PINS

660.OOYA RADIAL ARM DRILL
MODEL YMR-915, S/N 779088
COLUMN DIAMETER 9", ARM TRAVEL 24"
SPINDLE TO COLUMN 12" - 36"
SPINDLE TO BASE 11" - 43"
VERTICAL TRAVEL 78"
SPINDLE DIAMETER 2-9/16"
SPINDLE TAPER #4, SPINDLE STROKE 8"
SPINDLE SPEEDS 50 - 1500 RPM
BASE SIZE 60" X 27" X 6" TALL
MOTOR 3HP, ELECTRICS 480V, 3PH
WEIGHT 3,200 LBS, BOX TABLE 16" X 21" X 16"

PRECISION RIGGING LOADING PRICE $425


661.(7) SUNNEN HONE MANDRELS AND SLEEVES

662.MUSIC WIRE

663.SMALL MOTOR AND FOOT SWITCH

664.MONTGOMERY J2-3V V-BLOCK
(2) MONTGOMERY J2-2V V-BLOCKS

665.TOTE FILLED WITH GRINDING STONES

667.KALAMAZOO BELT AND DISC SANDER
MODEL S612V, BELT TABLE 6" X 10"
WITH 1/2" X 1/8" SLOT, BELT SIZE 6" X 48"
DISC TABLE 8" X 14", DISC SIZE 12", 480V, 3PH

PRECISION RIGGING LOADING PRICE $35

668.BALDOR DUAL 6" GRINDER
120V, 1PH

669.BLACK & DECKER 14" CHOP SAW
120V, 1PH, WITH EXTRA BLADES
AND STAND

670.CYCLONE BLASTING CABINET
DIMENSIONS 36" X 24" X 24"
OVERALL HEIGHT 60"
WITH GLASS BEAD
SILICON CARBIDE AND
OTHER BLASTING MATERIALS

PRECISION RIGGING LOADING PRICE $35

671.UNCOILING MACHINE
CAPACITY 5,000 LBS
115V, 1PH

PRECISION RIGGING LOADING PRICE $35

672.LARGE ASSORTMENT OF
RECEPTACLES AND PLUGS

673.LARGE ASSORTMENT OF RECEPTACLES
AND PLUGS AND CONNECTOR BODIES

674.LARGE ASSORTMENT OF
UNI-STRUT HARDWARE (2 TOTES)

675.LARGE ASSORTMENT OF
SEALTITE CONNECTORS
VARIOUS SIZES

676.LARGE ASSORTMENT OF
CONDUIT HANGERS (2 TOTES)

677.LARGE ASSORTMENT OF
UNI-STRUT HARDWARE

678.LARGE ASSORTMENT OF
UNI-STRUT HARDWARE

679.LARGE ASSORTMENT OF CONDUIT STRAPS

680.HEAVY DUTY WELDING TABLE
DIMENSIONS 72" X 36" X 33-1/2" TALL
3/4" SOLID STEEL TOP
VISE NOT INCLUDED

PRECISION RIGGING LOADING PRICE $35

681.5" BENCH VISE

682.24" CRESCENT WRENCH

683.8" CHUCK

684.BROOMS, SQUEEGEES, MOP BUCKETS

685.PARTS BIN

686.ASSORTED HAND TOOLS
SCRAPERS, ROLLERS AND
HAND SEAMERS

687.REGULATOR AND GAUGES

688.LOUISVILLE 4' STEP LADDER
LOAD CAPACITY 300 LBS

689.LARGE AMOUNT OF CLAMPS SET PIECES

690.SAF-T-BLOCK JACKS
CAPACITY 35 TONS

691.EAMES COMPOUND ARBOR PRESS
MODEL NO. 2, THROAT 7"

BRING TOOLS TO REMOVE FROM PRESS

692.SHIPPING BOXES
15-1/2" X 14-1/2" X 13-1/4"
APPROX 150 TOTAL
INCLUDES 2 STANDS
693.(2) SHELVES, CONTENTS NOT INCLUDED

694.NEW HKK CHAIN
AQUA-SERIES 100-1R
20FT LONG, 192 LINKS

695.CART AND WEIGHTS

696.METTLER TOLEDO SCALE
CAPACITY 5,000 LBS
PLATFORM SIZE 60" X 60"

PRECISION RIGGING LOADING PRICE $25

697.BARREL CART AND PUSH CART

698.CUDA CLEANING SYSTEMS
PARTS WASHER, 120V, 1PH
DIMENSIONS 52" X 30" X 59" TALL

PRECISION RIGGING LOADING PRICE $35

699.HEAVY DUTY CART
DIMENSIONS 39" X 24" X 40" TALL

700.SKYJACK SCISSOR LIFT
MODEL 3220, S/N 60110
CAPACITY 800 LBS
DRIVE HEIGHT 20', BATTERY 24V
PLATFORM HEIGHT 20'
SYSTEM PRESSURE 2000 PSI
LIFT PRESSURE 1600 PSI
MACHINE WEIGHT 3,740 LBS

PRECISION RIGGING LOADING PRICE $50


701.FULL TOTE OF 3/4" PIPE FITTINGS
ALL BLACK PIPE

702.FULL TOTE OF 1" PIPE FITTINGS
ALL BLACK PIPE

703.FULL TOTE OF 1-1/4" PIPE FITTINGS
ALL BLACK PIPE

704.FULL TOTE OF 3/8" & 1/2" PIPE FITTINGS
ALL BLACK PIPE

705.FULL TOTE OF 1/4", 1/4" & 3/8" PIPE FITTINGS
ALL BLACK PIPE

706.FULL TOTE OF 2" PIPE FITTINGS
ALL BLACK PIPE

707.ZEBRA PRINTERS AND LABELS

708.FULL TOTE OF 1/2" - 1-1/2" PIPE FITTINGS
ALL STAINLESS STEEL

709.3/4 TOTE OF 1/4" - 3/4" PIPE FITTINGS
ALL STAINLESS STEEL

710.OKAMOTO PRECISION SURFACE
GRINDING MACHINE
MODEL ACC12-24DX, S/N 63753
OKAMOTO CONTROL
CAPACITY 12" X 24"
GRINDING WHEEL 12", 480V, 3PH
MOTOR 5HP, 9714 HOURS
DIMENSIONS 108" X 76" X 70" TALL
WEIGHT 5,500 LBS, COOLANT TANK

PRECISION RIGGING LOADING PRICE $475

711.FULL TOTE OF 1-1/2" PIPE FITTINGS
ALL BLACK PIPE

712.LAMINATIONS 3" X 3" X 0.225" X 48"
V-BOARD, APPROX 1000

713.(2) CABINETS AND A SMALL TABLE

714.(3) SUNNEN HONE MANDRELS
AND SUNNEN HONE RETAINERS

715.CLINCHER PNEUMATIC STAPLING MACHINE

716.(2) WHEEL DRESSERS

717.SUNNEN HONE MANDREL
JAK20-1062UD-LD6X, MAX RPM 640
WITH SUNNEN S-1062 MANDREL SLEEVE

718.SUNNEN STONE RETAINERS

719.(2) 6" MACHINE VISES

720.FORKLIFT LIFTING BOOM
MAX CAPACITY 3,900 LBS
REACH 12'

PRECISION RIGGING LOADING PRICE $35

721.(2) NEW GOJO PRO 2000ML DISPENSERS

722.SUNNEN HONE STONES

723.SUNNEN HONE MANDREL Y44-1500PD
WITH SUNNEN ST-1375 & ST-1500
MANDREL SLEEVE

724.GLOBAL INDUSTRIAL 18"
WORK STATION FAN, 120V, 1PH

725.(2) TABLES, DIMENSIONS 20" X 24" X 30" TALL

726.(5) MORSE TAPER DRILL BITS

727.(6) MORSE TAPER DRILL BITS

728.LATHE TOOLING

729.COMBINATION END WRENCHES

730.(7) MORSE TAPER DRILL BITS

731.8" SUPER SPACER

732.LIVE CENTER

733.(2) STRAIGHT SHANK DRILL BITS

734.JACOBS 3/4" DRILL CHUCK

735.(6) MORSE TAPER DRILL BITS

736.SPIN INDEX

737.DUMORE TOOL POST GRINDER
MODEL 3584-210, S/N 57-031, 120V, 1PH

738.ROYAL PRODUCTS COLLET CLOSER

739.11" FACE PLATE

740.(2) T-HANDLE WRENCHES

741.CABINET 36" X 26" X 38" TALL
CONTENTS INCLUDED

742.DAREX SUPER PRECISION
DRILL SHARPENER, MODEL SP2500
S/N 263476J, SIZE RANGE 1/16" - 1"
120V, 1PH

743.LECTROTECH POWER UNIT
MODEL 10A, 120V, 1PH

744.BALDOR TOOL GRINDER, 1/2 HP
115V, 1PH, WITH (2) 6" DIAMOND WHEELS

745.10" 4-JAW CHUCK
WITH CHUCK KEY

746.SMITH-CORDNA CORONAMATIC
2200 TYPEWRITER

747.MICRO-DROP MD-1200
LUBRICATE DISPENSER

748.LUMA ELECTRIC FERROUS
METAL ETCHING MACHINE
MODEL 60, S/N 986004, 120V, 1PH

749.11" FACE PLATE

750.RITEHETE MELTING POT
MODEL VR, MAX TEMPERATURE 450°F
120V, 1PH

751.5C COLLETS

752.MILLER RESISTANCE SPOT WELDER
MODEL WT-1515, S/N JD729202, 115V, 1PH
50% DUTY CYCLE, 1-1/2 KVA

753.10" 4-JAW CHUCK

754.ROYAL PRODUCTS COLLET CLOSER

755.EAGLE ROOK TECHNOLOGIES AIR COLLET
AND GENERAL PURPOSE VALVE

756.10" FACE PLATE

757.CLAMP SET PIECES AND
STAINLESS STEEL PANS

758.CABINET, FILE CABINET AND SHELF

759.(3) 4-DRAWER FILE CABINETS

760.MILLER TIG WELDER
MODEL SYNCROWABE 250
S/N KH377997, 250 AMPS
40% DUTY CYCLE, MAX OCV 80
480V, 1PH

PRECISION RIGGING LOADING PRICE $35

761.SONOTEC ULTRAFORM ULTRASONIC
AND POLISHING SYSTEM
MODEL UF-5000 MICRO, 120V, 1PH

762.MAXESS 18" WORK STATION FAN
120V, 1PH

763.ZEISS STEREOMICROSCOPE
MODEL STEMI 2000-C, S/N 456105
MAGNIFICATION RANGE 6.5 x...50 x
WITH SCHOTT KL2500 LCD COLD
LIGHT SOURCE

764.EQUIPTO WORK BENCH
DIMENSIONS 72" X 31" X 38" TALL
AND BOOK SHELF

PRECISION RIGGING LOADING PRICE $25

765.JUSTRITE FLAMMABLE LIQUID
STORAGE CABINET
DIMENSIONS 23" X 18" X 35-1/2" TALL
CAPACITY 12 GALLONS

766.OIL CANS

767.CLARK HARDNESS TESTER
MODEL C16, S/N 15240
WITH WEIGHTS AND STAND

PRECISION RIGGING LOADING PRICE $35

768.(4) CARBIDE CUTTERS
WITH R8 TAPERED SHANKS

769.BORING BARS AND CUTTING HEADS

770.LATHE TURNING TOOL HOLDERS

771.JACOBS 1/2" DRILL CHUCK
WITH #4MT ARBOR

772.CRITERION BORING HEAD
MODEL DBL-203
WITH R8 TAPERED SHANK

773.HL AIR CYLINDER, NSM 2X2
WITH (3) AIR GAUGES

774.5C COLLET FIXTURE, 225 - 202
WITH 5C COLLETS

775.HEAVY DUTY CASTORS
WHEEL WIDTH 2"
WHEEL DIAMETER 6"

776.ASSORTED CLEANERS
PAINTS AND SPRAYS

777.TAPE, PLASTIC BAGS AND LIGHT BULBS

778.TOOL POST TOOL HOLDERS

779.NEW SAFETY OIL CAN

780.BORING BARS

781.JACOBS 3/4" DRILL CHUCK
WITH #4MT ARBOR

782.(2) JACOBS 1/2" DRILL CHUCKS

783.END MILLS AND SOME CARBIDE CUTTERS

784.V-BLOCKS

785.ASSORTED FITTINGS

786.ASSORTED LATHE CUTTERS

787.(2) DREMEL TOOLS AND ACCESSORIES

788.(2) AIR GRINDERS AND PNEUMATIC AIR

789.KENNAMETAL TURNING TOOL HOLDERS
AND LATHE ACCESSORIES

790.LIVE CENTER

791.MORSE TAPER DRILL BITS
SIZE RANGE 49/64" - 1"

792.ROYAL PRODUCTS COLLET CLOSER

793.INDEXIBLE CUTTER

794.COMPRESSOR TANK 12 GAL. MODEL 1Z717.

795.MORSE TAPER DRILL BIT
AND INDEXIBLE CUTTER

796.KDJ TOOL POST, 150-12523
WITH TOOL HOLDERS

797.(6) MORSE TAPER DRILL BITS

798.JACOBS 1" DRILL CHUCK
WITH #4MT ARBOR

799.(7) MORSE TAPER DRILL BITS

800.TOOL POST TOOL HOLDERS

801.(2) LIVE CENTERS

802.JACOBS 1/2" DRILL CHUCK
WITH #4MT ARBOR

803.(4) DEAD CENTERS

804.LIVE CENTER

805.PRECISION LEVEL

806.MORSE TAPER DRILL BITS
SIZE RANGE 33/64" - 3/4"

807.PALLET RACKING
(2) UPRIGHTS 24" X 10' TALL
(10) CROSSMEMBERS 8' LONG

WINNING BUYER IS RESPONSIBLE
FOR DISASSEMBLY AND REMOVAL


808.GALBREATH SELF DUMPING HOPPER
MODEL H50, S/N 100705
MAX LOAD 4,000 LBS, CUBIC YARDS 1/2

809.GLOBAL INDUSTRIAL 18"
WORK STATION FAN, 120V, 1PH

810.RIDGID THREADING MACHINE
MODEL 1822-1, S/N EA14401H96
120V, 1PH

PRECISION RIGGING LOADING PRICE $35

811.GREENLEE HYDRAULIC BENDER
SERIES 882

812.ELECTRICAL SUPPLIES
CABLES AND JUNCTION BOXES

813.FARMECH PORTABLE HYDRAULIC
RAM SYSTEM, CAPACITY 10 TONS

814.DAYTON 1 TON ELECTRIC CHAIN HOIST
230/460V, 3PH

815.(3) 1-3/4" COMBINATION WRENCHES

816.PIPE WRENCHES
18", 14" AND 12"

817.NEW SAIT AND BLUEFIRE
4-1/2" X 1/4" GRINDING WHEELS

818.(2) GREASE GUNS

819.GEAR PULLERS

820.RIDGID PIPE CUTTER

821.OTC 1130 & 1124 BEARING SPLITTERS

822.PORTO-MAG MAGNETIC DRILL
MODEL B2, S/N 1567, 120V, 1PH

823.BUTTON HEAD AND HEX HEAD SCREWS
NUTS BOLTS AND FASTENERS

824.(2) 3/8" ELECTRIC DRILLS
120V, 1PH

825.HOLE SAWS

826.DUFFERS CURRENT ANALYZER
(2) AMPROBE CLAMP METERS

827.GEAR PULLER

828.STRING LINE AND KNEE PADS

829.LARGE GEAR PULLER

830.SHELF 36" X 24" X 80" TALL
PLASTIC PARTS BINS INCLUDED
APPROX 100

831.(7) PLASTIC PARTS BINS
8" X 16" X 8" TALL
ONE IS A LITTLE SMALLER

832.ASSORTED HEAVY DUTY CASTORS

833.MIGHTY LINE DURABLE STRIPES
DIFFERENT SIZES, ANGLES AND COLORS

834.COME-A-LONGS

835.CAP SCREWS, SOCKET CAP SCREWS
BUTTON SCREWS, NUTS, WASHERS
FITTINGS AND MORE

836.CABINET WITH CONTENTS
OIL RAGS APRONS, TAPE
PLASTIC CONVEYOR ON TOP
IS INCLUDED

837.SECURALL SAFETY STORAGE CABINET
FOR FLAMMABLE LIQUIDS
DIMENSIONS 43" X 18" X 65-1/2" TALL

838.CONTENTS ON SHELVING
INCLUDES FITTINGS, NIPPLES
REDUCERS, ANCHORS
ELECTRICAL PARTS, PAINT SUPPLIES
AND COMPUTER PARTS

839.CONTENTS ON SHELVING
INCLUDES CONNECTORS
COUPLINGS AND PIPE HANGERS

840.GRAY 2" HOSE

841.FORK, SHOVEL, HANDLES
AND CORK BOARD

842.INGERSOLL RAND DRAIN VALVES
MAX PRESSURE 200 PSI

843.DAYTON SHOP VAC
MODEL 4YE74, 120V, 1PH

844.MILWAUKEE HEAVY DUTY CORE DRILL
MODEL DYMODRILL
CAPACITY 2-1/2" - 8", 120V, 1PH

845.ZURN PEX NON-BARRIER TUBING
1" DIAMETER

846.CONTENTS ON SHELVING, BUSHINGS
COVERS, BODIES, REDUCERS
AND ELECTRICAL ITEMS

847.CONTENTS ON SHELVING
LARGE AMOUNT OF O-RINGS

848.CONTENTS ON SHELVING
HEX CAP SCREWS AND
ASSORTED ELBOWS AND
CONNECTORS

849.CONTENTS ON SHELVING
ELECTRICAL SUPPLIES

850.LENNOX ROOFTOP HEATING
AND COOLING UNIT, L SERIES
MODEL LGC036S2BS1G
S/N 5604M04120
GAS HEAT WITH ELECTRIC COOLING
HEATING INPUT 78,000 BTUH
HEATING OUTPUT 62,400 BTUH
460V, 3PH

LOCATED IN NEVADA, IA
PLEASE CONTACT SMC AUCTIONS
FOR EXACT LOCATION


851.CONTENTS ON SHELVING
LARGE AMOUNT OF FITTINGS

852.ASSORTED PARTS, HARDWARE
AND SUPPLIES

853.CONTENTS ON SHELVING

854.CONTENTS ON SHELVING
CAP SCREWS, THREAD REPAIR
(3) HIGH VOLTAGE PROTECTION
CONTROLS

855.CONTENTS ON SHELVING
ASSORTED PARTS, HOSE CLAMPS
SET SCREWS

856.CONTENTS ON SHELVING
LARGE QUANTITY OF BEARINGS

857.CONTENTS ON SHELVING
LARGE QUANTITY OF AIR CYLINDERS

858.CONTENTS ON SHELVING
LARGE QUANTITY OF AIR CYLINDERS

859.CONTENTS ON SHELVING
LARGE QUANTITY OF
FILTER SYSTEM PARTS

860.LOUISVILLE 12' STEP LADDER
LOAD CAPACITY 300 LBS

861.CONTENTS ON SHELVING, SCREWS
LIGHT CURTAIN PARTS
CAMCO INDEXER

862.(4) DISCONNECT SWITCHES

863.ROMAN WATER COOLED TRANSFORMER

864.ROLLER CHAINS

865.(3) NIBCO 3" VALVES, 150 SWP

866.(2) LARGE CONDUIT BODIES

867.EASY BOB BREAKOUT BOX
MODEL 725

868.(2) NEW KILLARK CONDUIT BODIES
SIZE 2-1/2" AND COVERS

869.(4) CORE DRILLING BITS, 2" AND 12"
(2) NEW 3-1/2" AND 4"
THESE WILL FIT ON LOT 844

870.WESTINGHOUSE 250 AMP BREAKER

871.4" COMPRESSION CONNECTORS

872.NEW EGS HEAVY DUTY SINGLE PHASE
TRANSFORMER, PRIMARY 240/480V
SECONDARY 120/240V, 1/2 KVA

873.NEW BALDOR MOTOR, 7-1/2 HP
208-230/460V, 3PH, FRAME 213T

874.HIGH PRESSURE REGULATOR AND
WATER METER

875.OMEGA HAND HELD TEMPERATURE
SURFACE PROBE, TYPE K
MAX TEMPERATURE 325°F

876.(6) TUBES SHELL GADUS
EXTREME PRESSURE GREASE

877.NEW EGS HEAVY DUTY SINGLE PHASE
TRANSFORMER, PRIMARY 240/480V
SECONDARY 120/240V, 1/2 KVA

878.BALDOR MOTOR, 5 HP, 230/460V
3PH, FRAME 184T

879.GRACO PLASTIC AIR-OPERATED
DOUBLE DIAPHRAGM PUMP, SERIES I98A
MAX GALLONS PER MINUTE 100 - 379

880.HOFFMAN TEMPERATURE REGULATOR
SERIES 1140, SIZE 1", TYPE 06
RANGE 40 - 80, S/N 400148

881.BALDOR MOTOR, 1 HP, 208-230/460V
3PH, FRAME 56C
BODINE GEAR MOTOR, 115V, 1PH
1/15 HP
DAYTON PERMANENT MAGNET DC
GEARMOTOR, MODEL 6A194A

882.NEW BODINE GEAR MOTOR
115V, 1PH, 1/6 HP

883.HEAVY DUTY 30 AMP DROP CORD

884.(2) DORNER MOTORS
(1) BALDOR MOTOR

885.DAYTON INDUSTRIAL MOTOR
MODEL 6K562BA, 1 HP, 115/208-230V
1PH, FRAME 56H

886.NORTH BUMP CAPS (HARD HATS)

887.BALDOR MOTOR, 1 HP, 180V
FRAME 56C

888.NEW EGS HEAVY DUTY SINGLE PHASE
TRANSFORMER, PRIMARY 240/480V
SECONDARY 120/240V, 1PH, 2 KVA

889.REPAIRED BALDOR MOTOR, 3 HP
190/230V, 3PH, FRAME 56CZ

890.NEW BALDOR MOTOR
3/4 HP, FRAME 56C

891.WIRE TERMINAL CONNECTORS

892.BOSTON GEAR 700 SERIES GEAR BOX

893.MARATHON MOTOR, 3HP
230/460V, 3PH, FRAME 182TC

894.(2) SIEMENS 100 AMP CIRCUIT BREAKERS
(1) SIEMENS 20 AMP CIRCUIT BREAKER
(1) CUTLER-HAMMER 100 AMP CIRCUIT BREAKER

895.BALDOR MOTOR, 1/2 HP, FRAME 56C
WITH BOSTON GEAR GEAR BOX

896.DORNER RIGHT ANGLE GEAR BOX
820-273, ORIENTAL MOTOR REVERSIBLE
MOTOR, 4RK25GN-CT, 200V

897.FLOOR SCRUBBER 17in
115 VOLT WITH EXTRA PADS

898.THREAD REPAIR PARTS

899.HELICOIL THREAD REPAIR KITS

900.INGERSOLL RAND PNEUMATIC
DIAPHRAGM PUMP

901.DAYTON INDUSTRIAL MOTOR
MODEL 6K481BB, 1/3 HP, 115/208-230V
1PH, FRAME 48

902.COMBINATION WRENCHES
1-7/8" AND 1-5/8"

903.HEAVY DUTY 20 AMP DROP CORD

904.MORSE RAIDER GEARBOX
OUTPUT TORQUE 2305 IN-LBS

905.EATON HEAVY DUTY SAFETY SWITCH
200 AMPS, 600V

906.TRABON MODU-FLO PUMP
PACKAGE LUBRICATION SYSTEM

907.DORNER MOTORS, 115/230V
1PH, FRAME 42CZ, 25 HP
BALDOR MOTOR, 230/460V
3PH, 1/2 HP, FRAME 56

908.(2) NEW HUBBELL JUNCTION
AND PULL BOXES

909.(2) NEW SHARPE SWING VALVES
SIZE 1-1/2", CODY CF8M
WORKING PRESSURE 200 PSI

910.DORNER SHAFT AND IDLER ASSEMBLY
3" DIAMETER, 18" WIDE

911.NUTS AND BOLTS

912.KEY STOCK
5/16", 5/8", 3/4", 1"

913.NEW EMERGENCY SYSTEMS
EMERGENCY LIGHT, SERIES ET
120V, 1PH

914.WELLER SOLDERING GUN

915.THERMOCOUPLE DIGITAL THERMOMETER
MODEL 39658-J

916.(2) DORNER MOTORS, 115/230V
1PH, FRAME 42CZ, 25 HP

917.NEW MARATHON MOTOR, 1-1/2 HP
208-230/460V, 3PH, FRAME 145T

918.LEVER ACTION BARREL PUMP
FITS 30 - 55 GALLON BARRELS

919.BALDOR DIRECT CURRENT
INDUSTRIAL MOTOR, CDP3330
1/2 HP, FRAME 56C

920.NEW SOL-VEX X-LARGE 22 MIL
UNLINED NITRILE GLOVES

921.DORNER MOTOR, 130V, 1/3 HP
2500 RPM, WITH WPM MOTOR
SPEED CONTROL

922.DAYTON JET PUMP MOTOR
MODEL 9R759, 3/4 HP, 115V
1PH, FRAME 56J

923.COUPLINGS AND CONNECTORS

924.(2) PARTS BINS WITH FUSES SOME
OTHER ASSORTED HARDWARE

925.ACU-RITE DRO, 115/230V, 1PH

926.(2) SQUARE D 100 AMP CIRCUIT BREAKERS

927.STAFFORD SET COLLARS AND PULLEYS

928.NEW EGS HEAV-DUTY TRANSFORMER
HS1F500B, PRIMARY 240/480V
SECONDARY 120/240V, 1PH, 1/2 KVA

929.24" PIPE WRENCH AND REMINGTON
POWER ACTUATED TOOL

931.NEW FORKLIFT TIRES

933.CLAMPS

934.MIGHTY LINE DURABLE STRIPE AND TAPE

935.DAYTON JET PUMP MOTOR
MODEL 3N090K, 1-1/2 HP
FRAME 56J, 208-220/440V, 3PH

936.QUART SIZED CAULK GUN
3/4" DRIVE EXTENSION
WRENCH AND CRIMPER

937.(2) PHD ROTARY ACTUATORS
RAS132X180-E-NB

938.A.O. SMITH AC MOTOR, H658
3/4 HP, 460V, 3PH, FRAME JA56

939.NEW EGS HEAV-DUTY TRANSFORMER
HS1F500B, PRIMARY 240/480V
SECONDARY 120/240V, 1PH, 1/2 KVA

940.TAPE

941.(2) NEW EGS HEVI-DUTY TRANSFORMERS
HS20B250, PRIMARY 120/240V
SECONDARY 16/32V, 1PH, 1/4 KVA

942.ADHESIVES, SOLVENTS
CLEANERS AND SPRAYS

943.LOVEJOY COUPLERS

944.DAYTON INDUSTRIAL MOTOR
MODEL 6K481BA, 1/3 HP, 115/208-230V
1PH, FRAME 48

945.PENTA POWER DC MOTOR
SPEED CONTROL, MODEL KBMD-240D
115V

946.(2) SQUARE D 100 AMP CIRCUIT
BREAKERS, CHALLENGER 150 AMP
CIRCUIT BREAKER

947.GREASE ZERTS

948.PENTA POWER DC MOTOR
SPEED CONTROL, 120V, 1PH

949.SQUARE D 60 AMP, THERMAL
MAGNETIC CIRCUIT BREAKER
(2) SIEMENS 20 AMP BREAKERS
CIRCUIT BREAKER

950.BOSTON GEAR GEAR BOX
OUTPUT TORQUE 136 LBS/SQ. IN.

951.LEVELING FEET

952.CLAMPS

953.RECEPTACLES AND LOCKING PLUGS

954.CASTORS, 4" X 1-1/4"

955.RED HEAD CONCRETE ANCHORS

956.ULTIMAX INFRARED THERMOMETER
MODEL UX-20

957.ASSORTED HARDWARE
NUTS, WASHERS, SCREWS

958.NEW MARATHON DUAL VOLTAGE
MOTOR, 1-1/2 HP, 3PH, FRAME 145T

959.ASSORTED HARDWARE

960.STANLEY VIDMAR CABINET
11 DRAWERS
DIMENSIONS 30" X 29" X 59-1/2" TALL

PRECISION RIGGING LOADING PRICE $35

961.BLACK AND DECKER 7"/9"
ANGLE SANDER, 120V, 1PH

962.RIDGID PIPE THREADER

963.UE SYSTEMS ULTRASOUND
DETECTOR WITH PROBE
FREQUENCY GENERATOR
AND HEAD SET

964.ELECTRICAL WIRE

965.GAS MASK

966.CONNECTORS, COUPLINGS
AND CONDUIT FITTINGS

967.NEW HAMMOND POWER SOLUTIONS
INDUSTRIAL CONTROL TRANSFORMER
PRIMARY 240/480V, SECONDARY 120/240V
75 VA, CAT NUMBER PH75MQMJ

968.SQUARE D THERMAL MAGNETIC
CIRCUIT BREAKER, 30 AMPS

969.NEW EGS HEAVY DUTY
SINGLE PHASE TRANSFORMER
PRIMARY 240/480V, SECONDARY 120/240V
1/2 KVA

970.RED HEAD CONCRETE ANCHORS

971.(2) CUTLER-HAMMER 40 AMP BREAKERS
(1) SIEMENS 30 AMP BREAKER

972.(2) NEW APPLETON 2" LB CONDUIT BODIES

973.2-5/8" WRENCH

974.2" WRENCH
1-7/8" WRENCH

975.(4) PARTSCAN 7100 LIGHT CURTAINS

976.7/8" DRIVE RATCHET WRENCH
3/4" DRIVE RATCHET WRENCH

977.(4) WRENCHES ALL 1-5/8"

978.(2) SHELVES
DIMENSIONS 36" X 18" X 85" TALL
WITH CONTENTS

979.PIG SUPER ABSORBENT
PILLOW-IN-A-PAN OIL
ABSORPTION PILLOWS

980.A.O. SMITH FAN MOTOR
MODEL F48V51A01

981.FILTER PARTS

982.ELECTRICAL SUPPLIES INCLUDING
SELECTOR SWITCHES, FDK LITHIUM
BATTERIES, TRIAD MAGNETICS
TRANSFORMER, MODEL N-86X
DC POWER SUPPLY

983.OMEGA POCKET PAL PH PROBE
MODEL PHH-80BMS, S/N 0307207
COLE PARMER PH PROBE
MODEL PH20 SERIES, S/N 32217
REALISTIC SOUND LEVEL METER

984.6' LEVEL AND 4' LEVEL

985.NUMATICS FLEXIBLOK

986.POWER-ONE LINEAR POWER SUPPLY
MODEL HB5-3/OVP-A, EUROTHER
DRIVES ISOLATED NON-REGENERATIVE
SINGLE PHASE DC DRIVE
MODEL 1211C-DN21, 2HP, 10 AMPS
115V, 1PH

987.BALDOR DUAL VOLTAGE MOTOR
2HP, FRAME 56C, 3PH

988.NEW FESTO FILTER REGULATOR

989.NEW DAYTON MOTOR
1/6HP, 115V, 1PH

990.DAYTON SPLIT PHASE MOTOR
MODEL 5K596C, 1/2 HP, 115V, 1PH
FRAME 56

992.TOTE LIDS

999.TENNANT FLOOR SCRUBBER
MODEL M7100, 36V
SCRUBBING LENGTH 30"
WEIGHT 2050 LBS


1000.(3) CABINETS

1001.PORTABLE WORK STATION
DIMENSIONS 40" X 24" X 50" TALL

1002.(3) OFFICE CABINETS

1003.STORAGE CABINET
DIMENSIONS 36" X 28" X 42" TALL

PRECISION RIGGING LOADING PRICE $25

1004.(2) FILE CABINETS

1005.WORK STATION
DIMENSIONS 35" X 30" X 54" TALL

PRECISION RIGGING LOADING PRICE $25

1006.PORTABLE WORK STATION
DIMENSIONS 27" X 25" X 50" TALL

1007.PORTABLE WORK STATION
60" X 36" X 75" TALL

1008.(2) CARTS

1009.TOTES, DIMENSIONS
24" X 16" X 14" TALL
(8) MILK CRATES

1010.STANLEY VIDMAR CABINET
11 DRAWERS
DIMENSIONS 30" X 29" X 59-1/2" TALL

PRECISION RIGGING LOADING PRICE $35

1011.CARTS/SKATES
DIMENSIONS 24" X 16" X 7" TALL
APPROX 40

PRECISION RIGGING LOADING PRICE $35

1012.CARTS/SKATES
DIMENSIONS 25" X 15" X 6" TALL
APPROX 40

PRECISION RIGGING LOADING PRICE $35

1013.CARTS/SKATES
DIMENSIONS 28" X 20" X 7" TALL
APPROX 40

1014.EGS 3 PHASE GENERAL PURPOSE
TRANSFORMER, T2H75S, 75 KVA
HIGH VOLTAGE 480 DELTA
LOW VOLTAGE 208Y/120
DIMENSIONS 28" X 23" X 34" TALL
WEIGHT 500 LBS

PRECISION RIGGING LOADING PRICE $35

1015.HEAVY DUTY CART
DIMENSIONS 36" X 28" X 34" TALL

1016.NEW DODGE QUANTIS
IN-LINE HELICAL REDUCER

PRECISION RIGGING LOADING PRICE $25

1017.NEW MORSE RAIDER REDUCER

1018.EMERSON MOTOR

1019.NEW MORSE RAIDER REDUCER

1020.L-W CHUCK CO
DIVIDING HEAD

1021.GALBREATH DUMPING HOPPER
MODEL LH2000, S/N 100557
CAPACITY 2,000 LNS, 2 CU. YDS.

PRECISION RIGGING LOADING PRICE $35

1022.(2) SHOP LIGHTS

1023.5" X 10' OIL SOCKS

1024.NEW SCREW SHAFT
LENGTH 45"

1025.BLACK ANTI-FATIGUE MATTING
3' X 60' LONG, 5/8" THICK

1026.SAFETY BARRIER PANELING
AND GATES

1027.ASSORTED TUBING

1028.DAYTON MOTOR PUMP
PUMP #1D878, MOTOR #9P044B
1-1/2 HP, 115/230V, 1PH, FRAME 56C

1029.DAYTON WATER TANK
MODEL 3GVT9, S/N 3GVT901452
TANK VOLUME 62 GALLONS
MAX WORKING PRESSURE 125 PSI

1030.NEW ROLL COLEMAN CABLE
PART #223280508
12/3 SEOOW SEOPRENE, 500'R

1031.SANDPIPER DIAPHRAGM PUMP

1032.(2) PUSH CARTS AND BARREL DOLLY
CONTENTS INCLUDED

1033.STEEL, ANGLE, BAR AND TUBE

1034.CANVAS MATERIAL AND RUBBER

1035.DAYTON FAN

1036.(4) BOXES, POR GUSSTED BAGS
54" X 44" X 96" X 2 MIL

1037.NEW UNIVERSAL SPILL KITS

1038.DRY ERASE BOARDS

1039.TOOLING/DIE OILERS

1040.PAX LUBRICATION SYSTEM
MODEL 5-6, S/N 7950

1041.ASSORTED BELTS

1042.ASSORTED WIRE

1043.(3) TRASH CANS

1044.PRESS PART

PRECISION RIGGING LOADING PRICE $25

1045.BANDING CART

1047.HAND PUMP FOR A 5 GALLON BUCKET

1049.PALLET JACK

1050.(15) COLLAPSIBLE WIRE BASKETS

PRECISION RIGGING LOADING PRICE $50

1051.(17) COLLAPSIBLE WIRE BASKETS

PRECISION RIGGING LOADING PRICE $35

1052.HEAVY DUTY WELDING TABLE
DIMENSIONS 60" X 40" X 36" TALL
SOLID STEEL TOP THICKNESS 1/2"

PRECISION RIGGING LOADING PRICE $35

1053.THANKS FOR BIDDING!

1054.(20) COLLAPSIBLE WIRE BASKETS

PRECISION RIGGING LOADING PRICE $50

1055.(24) COLLAPSIBLE WIRE BASKETS

PRECISION RIGGING LOADING PRICE $50

1056.BACK GAUGE PARTS

PRECISION RIGGING LOADING PRICE $35

1057.PALLETS

PRECISION RIGGING LOADING PRICE $75

1058.HEAVY DUTY CART

1059.WIRE

2016, SMC Company. All rights reserved

SMC Company: Auctions - Liquidations - Appraisals
1287 W Ave - Ames, IA 50014
Ph: (866) 961-3211 - Fx: (515) 232-9411